Tools Reviews

Top 5 Best Dewalt Impact Drivers – Expert’s Pick in 2021!

Dewalt is one of the most trusted names from east to west when it comes to power tools. Dewalt has successfully made its name as a pioneer in different power tools, from lightweight little drills to large, heavyweight lawnmowers. Impact drivers are one of the most commonly used tools that Dewalt takes pride in making.

But even Dewalt makes a number of different impact drivers that sometimes make it hard to pick the Best Dewalt impact drivers! If you are in the same dilemma as many other users, we are here to help. In this piece, we are going to compare 5 Dewalt impact drivers that can satisfy your power tool needs as conveniently as possible.

Let’s begin!

Why Do We Trust Dewalt?

Dewalt has been producing top-quality indoor and outdoor power tools for decades. The origin of the company goes back to 1923, and since then, it has been making some of the most industry-leading power tools for the global market. Today, Dewalt is one of the trusted names in the US market for anyone using a power tool.

Impact Drivers vs. Drills

Although the look and design of both an impact driver and a drill look similar, there are some key differences between these two types of tools.

Drills offer lower torque than impact drivers. The impact drivers use a combo of fast rotation strike and high torque, while the drill offers a lower torque and rotation. However, a hammer drill can deliver fast rotation, as well.

While the fast rotation of a hammer drill powers up the bit to pierce through solid materials, an impact driver helps to nudge the fasteners.

What can I do with a Dewalt impact driver?

Impact drivers are high-torque tools peacefully used for driving screws and tightening nuts.

You can also make small holes in light-gauge steel and softwood with an impact driver. However, you need to use a standard hex-shank drill bit.

5 Best Dewalt Impact Drivers

Here are the 5 top impact drivers from Dewalt that you can check out right away! Read till the end to find out your match!

1. DEWALT 20V Max Impact Driver Kit- Best For Speed

The first one on our list is the Dewalt 20V DCF885C1. This compact impact driver is one of the very best from the Dewalt family. It comes with a 5.5-inch length that can easily be handled by one hand. Then again, it’s impressively lightweight, as well, weighing just around 2.8 pounds. It accepts 1-inch bits pretty easily.

What We Like

(+) Compact Device

With only a 5.5-inch length, the driver is actually quite compact. Its 2.8-pound weight makes it even more convenient to hold on one hand only. Conveniently sneak into any space in a matter of seconds.

(+) 3 LEDs

The device has 3 LED lights attached for easy navigation in darker environments. It gets effortless to find your ways in tighter places.

(+) Variable Speed

It has a variable speed trigger to alter the speed according to your need. Choose the impact as per the power required.

Keep In Mind

(-) Battery Life:

The Battery life is not really up to the mark. You have to recharge a few times if you are working for the whole day.

2. DEWALT 20V MAX XR Impact Driver- Best For Long Battery Life

Need more lightweight devices? No worries, Dewalt has another 20V impact driver that comes with a very lightweight design. Introducing the DCF887B 20V MAX XR. Weighing just only 2 pounds, it’s quite lighter than the DCF885C1. However, being lightweight doesn’t mean it had to sacrifice a lot. It comes with almost all the features like the previous one.

What We Like

(+) Compact Device

This one also comes with a compact setup. Its 8 x 3 x 5.88 inches profile makes it pretty easy to hold it on the one hand and get the job done in no time.

(+) 3-Speed Setting

Take control of the speed you need to apply on any surface. The trigger allows you to deliver precision impact on the surface with 3 different speed options. Pick the one that suits your application.

(+) Battery Life

While the DCF`C1 kind of disappointed with its low power support, the DCF887B made it up. It provides extended battery support with a full charge and requires less frequent recharging.

Keep In Mind

(-) Switch Issues

Some users complained that the switch gets jammed sometimes and needs a few moments to fix. Don’t freak out if that happens.

3. DEWALT 20V MAX XR Impact Driver Kit- Best For Lightweight

Another 20V impact driver from Dewalt is the DCF887D2. If you are not into lightweight devices, then picking up the DCF887D2 is going to work for you in a better way. As we have seen previously, both of those drives weighed less than 3 pounds, making them perfect handy drivers. However, sometimes, a bit of weight can translate into better handling. That’s why this 7 pounds driver is going to be a perfect fit.

What We Like

(+) Powerful Brushless Motor

It comes with a powerful brushless motor that delivers the effective power you need for the best result. The precision drive system on the device makes it extremely easy to get the job done in no time.

(+) 3 LED Light

In order to make it really easy and convenient to work in darker conditions, the device has 3 LED lights on it. Simply turn on the lights when you are working in tighter spaces.

(+) Easy Grip

No, being heavyweight doesn’t mean you need to struggle with gripping. This one has an easy-gripping system so that it doesn’t slip off your hand.

Keep In Mind

(-) Low-Speed Low-Torque

Unlike the previous models, the lowest speed of this driver doesn’t deliver much torque, so you may need to start from the second speed.

4. DEWALT XTREME 12V MAX Impact Driver Kit- Best for Shorter design

Now, if you are not so into heavier devices like the DCF887D2, don’t worry. We have something that may suit your need for lightweight handling. The DCF801F2 is the lightest device we have on our list. Unlike the DCF885C1 and DCF887B, the DCF801F2 comes with a surprising 1.75 pounds of weight. However, the battery is lower than all three models till now. But that being said, the battery support is efficient enough.

What We Like

(+) High Torque

The device comes with 3-speed settings with a variable speed trigger option. Then again, the torque produced by the device is 52% more than any other Dewalt impact driver. So, that’s a winner right there.

(+) Lightweight

So far, this one is the lightest driver we have reviewed. Weighing just 1.75 pounds, you can tell how lightweight and compact it is.

(+) Shorter

Speaking of compact devices, the driver’s length is only 5 inches. This means the device is 19% shorter than the other Dewalt impact drivers.

Keep In Mind

(-) Lower Battery Capacity

Although the battery support is not something you can complain about, its 12V battery could have been replaced by a 20V one for better and optimum support.

5. DEWALT ATOMIC 20V MAX Impact Driver

The DCF809B is one of the very best impact drivers that Dewalt has produced recently. If you were impressed by the DCF885C1, then you have enough reasons to be more impressed by this one. This is because the DCF809B produces more torque than the DCF885C1. To be specific, it offers 21% more torque with the same voltage of battery power and with a shorter profile.

What We Like

(+) Better Torque

With its 3-speed settings, the device produces more torque than the DCF885C1 to make sure you get your job done in a more precise manner. The 1700 in-lbs torque is just the power you need.

(+) Short Device

Although it’s a 20V device, it comes with a short length of 5.1 inches, which makes it really short and compact. You can easily handle it and place it in difficult spaces to reach.

(+) LED Ring Light

The front side of the driver has 3 LED lights positioned in the form of a ring. This illuminates your workspace pretty well.

Keep In Mind

(-) No Battery Included

The batteries are not included in the pack, so you have to purchase those separately.

How Do We Determine Which DeWalt Impact Driver is The Best?

To determine the best impact driver, we need to check the following factors.

Torque Testing: The more the torque, the better impact you will get over the fastener. Try not to stick to lower torque if possible.

Size and weight: It’s better to go for a handy and compact device that doesn’t cause fatigue on your hand. If you can use it with one hand only, it’s even better.

Comfort Grip: The handle should come with a rubbery grip that doesn’t let the machine slip off from your hand. Check the texture on the grip for assurance.

Battery Volts and Amp Hours: If you have enough budget, it is better to go for the drivers with higher battery volts and Amp Hours. Try the 20V devices for the best output.

RPM: RPM refers to the rotation of the driver’s head per minute. The more the RPM rate, the more speed it can pull up, resulting in a faster response.

Speed settings: Not all the nuts and bolts need the same speed for fastening. That’s why it’s always better to have multiple speed options. Most Dewalt drivers have 3-speed options, so check it out.

Final Words on the Reviews of Dewalt impact drivers

So that’s it for today; you can check out the 5 Dewalt impact drivers that we have listed down here today for the best result in your projects. However, Dewalt has a few more drivers in production that you may find useful, depending on your needs and budget. So, according to your need, the best Dewalt impact driver may vary.

If you pick one right away, we suggest you pick up the ATOMIC 20V MAX Impact Driver DCF809B for its better torque and higher power.

7 Best Paint Sprayer for Cabinets Reviews with Types, Features & Buying Guide

Back when things were more primitive, homeowners used to whip out paintbrushes when it came to painting their kitchen cabinets. However, times have changed and most homeowners are so busy with their hectic schedule that they often don’t have time and lack great patience to use a paintbrush to paint kitchen cabinets.

If you’re a homeowner, you’ll be glad to know that with the best paint sprayer for cabinets, you’ll be able to finish plenty of painting activities, as well as save a lot of time.

Considering your advantages and benefits, we’ve narrowed down the 7 best paint sprayers for cabinets. We hope you’ll receive our judgment in picking out the best paint sprayers for cabinets positively.

Types of Paint Sprayers for Cabinets

Paint sprayers are mainly divided into 4 types. They are HVLP, Airless, LVLP, and Conventional paint sprayers.

HVLP:

HVLP paint sprayers use lower air pressure and a higher volume of paint so that they can control the even spread of the color in reliability. With them, you’ll be able to save money, minimize the wastage of paint due to paint splatter and overspray, as well as conserve time.

Airless:

Airless paint sprayers work without needing a compressor or a turbine. They’ll allow you to spray with numerous unthinned materials. They work 10 times faster than a brush and 4 times faster than a roller.

LVLP:

LVLP paint sprayers make use of an air compressor and a hose to run a spray gun. They only need 3 and 10 pounds PSI in order to function properly. They can work with less and smaller powerful air compressors.

They create tiny patterns that will take more time when painting a cabinet, however, with more accuracy.

Conventional:

Conventional paint sprayers can smear paint or liquid in thin coats with a spray gun that is connected to a pressurized tank with a high-pressure hose. They take advantage of an air compressor to operate properly. Despite being perfect for painting and repainting kitchen cabinets, they’re quite expensive to purchase.

Main Features of Paint Sprayers

Motor & Drive System: These parts function together in order to provide the pump with power efficiently. They’re accessible in units that get their power from gas and electricity.

Piston Pump: The heart of every paint sprayer is the piston pump. This component can draw the coating from the bucket and afterward, pressurize the layer.

Pressure Control Dial: This piece can adjust the fluid pressure. During spraying, you should adjust the fluid pressure to the lowest. Adjusting it to the lowest will produce less overspray. This type of practice also lets you make the tips and the unit lasts for a long time.

Manifold Filter: The manifold filter gets hold of debris when it is getting inside the sprayer. It can remove and identify items that will clog the spray tip, have an adverse impact on the quality of the finish, and cause serious damages to the sprayer.

How to Choose The Best Paint Sprayers for Cabinet

Ease of use

HVLP paint sprayers are the best ones to buy when it comes to usability. They’re easy to control and use. They cause only a small amount of overspray; which makes them an excellent option for painting cabinets. So, if easy usability is that important to you, you should choose the ones whose type is HVLP.

However, if you’re looking for a unit that can provide you easy usability, as well as perfectly handle big projects, then the HVLP ones aren’t the one for you. Instead of them, pick airless paint sprayers. They deliver superb performance. Still, they could be challenging as they produce a lot of oversprays.

Capacity

Paint sprayers with a high capacity won’t make you stop and refill all the time while you’re spray painting. Among the 4 types of paint sprayers, airless sprayers provide the highest capacity. So, you should choose them.

Reviews of 7 Best Paint Sprayers for Cabinets

1. HomeRight Finish Max C800766 Paint Sprayer

The HomeRight Finish Max C800766 is the best paint sprayer for cabinets for those who’re looking for one that won’t cause fatigue on their hands despite being used for a long time. This sprayer allows you to feel comfortable and lightweight. It’s also a great choice for beginners, as it doesn’t come with tricky or complicated features tough to deal with

The spray nozzle is crafted from durable brass so that it has protection against warping and damage. The brass material enables the nozzle to bear temperature changes. So, you can relax if you’re worrying too much about it wearing out after prolonged use.

2. Wagner FLEXiO 590 HVLP Paint Sprayer

This paint sprayer is very powerful and is capable of providing an amazing, high-quality result. So this have brought as 2nd best paint sprayer for cabinets. It’s an efficient tool with which you can do any painting job comfortably, regardless of what the project is.It lets you paint with undiluted paint. You can use it without any thinning agent to spray. It features interchangeable spray nozzles for different spreads

Thanks to this feature, you’ll have detailed control and high speed for painting large areas. Overall, it’s the best homeowner paint sprayer one could possibly get.

3. REXBETI Ultimate 750 Paint Sprayer

The Ultimate 750 Paint Sprayer from REXBETI can give you an excellent when it comes to painting cabinets. It’s capable of supplying high-powered paint spraying precisely and in a controlled way.

It comes with 3 different interchangeable nozzles, from thinning vanishes to chalking paints or thicker latex. The entire body of this unit is comfortable and lightweight to hold. Therefore, you’ll experience less hand fatigue in an extended time. So this have brought as 3rd best paint sprayer for cabinets.

4. Wagner Double Duty HVLP Paint Sprayer

With the Wagner Double Duty HVLP Paint Sprayer, you can easily get a maximum result and robust, no matter what the experience level and nature of the project are. This sprayer incorporates an adjustable cap which will let you have precise control over the paint flow, as well as a change to different viscosity of paint whenever you need it.

Moreover, it’s equipped with a mechanism for both indoor and outdoor use without requiring any sort of user experience. Overall, it’s perfect for projects that are large and small.

5. Graco Ultra Max Airless Handheld Paint Sprayer

The Graco Ultra Max Airless Handheld Paint Sprayer is regarded as one of the best lightweight and compact paint sprayers for household painting and painting kitchen cabinets. It can be used in any location without going through any trouble with tangling and the length of the cord.

This product is quite easy to use in small places, which is why it’s an excellent choice for small painting projects and the inside of kitchen cabinets. It’s capable of covering large areas at a max speed with great efficiency.

6. HomeRight Super Finish Max Painter

This paint sprayer from HomeRight is another compact and lightweight unit from which you can receive high-quality and performance spray. With this product, you don’t ever have to worry about warping as it includes a strong spray nozzle made of brass.

Also, this paint sprayer isn’t constructed from plastic that warps easily under the presence of high temperatures. Moreover, it needs minimal paint thinning only. Therefore, you’ll have no problem achieving smooth color coverage and robustness in a small number of coats.

7. Graco Ultra Airless Handheld Paint Sprayer

Last but not the least; the Graco Ultra Airless Handheld Paint Sprayer is built to paint furniture and kitchen cabinets with sheer perfection. It’s mainly favorable for its lightweight, ease of use, and extra versatility.

You can use this unit any place you want, whether it’s inside or outside your house; without having risks of limited reach or cord tangling. It lets you paint in small spaces with accurate control. Overall, it’s an excellent option for homeowners.

Maintenance of the Paint Sprayers

Keeping the filter clean

When you’re about to change the paint bucket, you should first clean the filter screen. If there is dirt or debris on the screen, use a soft bristle brush to eliminate them.

If you delay cleaning them, they will enter the tip of the gun, where the filter ends up getting clogged keeping them out and causing further damages. So, you must keep it clean as soon as you discover the spray patterns distorting.

Protect the motor from paint

You must try to keep the motor clear of paint. The only way you can do that is by cleaning off the splatters daily. If the motor by any chance gets any kind of paint on it, it starts overheating as paint on the surface acts as an insulating blanket.

If you want to prevent the motor from overheating, use a motor cover while spray painting. It’ll protect it from paint and keep it cool.

Look after the valves

If you want your paint sprayer to always remain in good working condition, you have to lubricate the inlet valve after you’re done using it. You should completely clean the valve assembly using water and a bristle brush. If you still find the sprayer dripping even after cleaning, then it’s time to replace it.

Pour the paint

Before you pour paint into the sprayer, you have to make sure that it doesn’t have any debris that might clog and damage the sprayer. You can pour the paint using a paint strainer into another bucket. Afterward, pour the strained paint into the sprayer.

Use proper fluids for protection

You should never use water as a fluid to keep the pump intact. Many parts of the sprayer are constructed from steel and metals. Using water will cause them to rust, especially if you store it in water for a long time.

So, if you want to make use of fluids to keep the sprayer in excellent shape, you should first read the manual and use fluids that the manufacturer recommends. These fluids are excellent at preventing rust and making sure the sprayer stays perfect for upcoming projects.

Buying Guide for the best paint sprayer for cabinets

Price

Before you make a purchase, you must ask yourself one important question and that is how much you’re willing to invest in a paint sprayer. The only way you’re going to get the answer to this question is by creating a budget times two you’re obliged to pay.

If the paint sprayer that has attracted your interest comes with a price more than the doubled figure, you should immediately remove it from the list. It’s very important that the one you’re buying is providing you with value for its cost.

Customer reviews

You have to remain cautious and careful when you’re looking to buy a paint sprayer. You need to understand them better. You can do that by reading reviews of other customers on them.

Purchasers who are verified will always give a positive review for high-quality products. If your list has a product with little positive and more negative reviews, it’s better to cross them out. Also, look out for fake reviews.

There are some companies or sellers that appoint other people to write positive reviews about their equipment without taking a thorough look. Products that are produced overseas are better in quality. They’re pretty easy to afford.

Products made in the USA are also good. However, in order to acquire them, one must pay plenty amount of money.

Using a Paint Sprayer like a Professional

Before you start using your recently bought paint sprayer, you have to ensure that the surrounding area doesn’t have anything that might make you trip. You also need to ensure that the cabinet surface you don’t want to paint is covered with drop cloths or plastic.

You even have to read the instruction before using the paint sprayer. You must stir the paint in accordance with what the instructions said. Moreover, before you spray the paint, you need to get the motion right and for that, you have to practice moving the hose a lot.

You shouldn’t move the hose too slowly when you’re practicing, as it shoots the paint out fast. Instead, you should try moving it like a brush on the paint, 2 to 3 feet per second.

Furthermore, you need to make sure that the nozzle stays perpendicular to the cabinet surface. You must keep it 10 inches away from the surface, not more than that. Try to keep the distance the same. If there’s one slight change, it might change the way your paint is applied.

Protective Gear to Wear when Paint Spraying

When you’re paint spraying, you must wear protective gear. By wearing protective gear, you’ll be able to prevent toxic chemicals from entering your body. One of the most essential things you must use when paint spraying is an activated carbon respirator. It’ll keep you protected from the paint and solvent while cleaning fumes.

You should also wear gloves when cleaning the painter or painting, as well as protective clothing in order to ensure extra protection. If you, by any chance, get solvents or paint on yourself, take a look at the instructions on what to do. As a primary solution, you can try washing it off with warm soapy water.

Conclusion on the Review of best paint sprayer for cabinets

We understand that selecting the right paint sprayer among so many options can be really difficult to do. So, we hope that the article we’ve penned out for you is able to make you understand what you must look for when you’re about to purchase one. A spray painter is a pretty serious investment, so it’s important that you buy one meeting all of your requirements.

Check our other reviews on Best Sliding Miter Saw for Homeowner

10 Best Tool Chest: Reviews and Ultimate Buying Guide

Whether you’re a professional handyman or a do-it-yourself enthusiast, there’s no denying that a good tool chest makes the job easier. Aside from being a secure storage space, these chests also keep all your tools neatly in place, so you don’t have to guess which items go in each drawer.

If you’re new to organizing all your tools, then you might be in the market for a new tool chest. But because of the many options available, the search can be tricky.

To help you in this pursuit, we searched high and low to give you ten of the best tool chest in the market. After you’re done reading this article, we guarantee that you’ll find the best tool chest to suit your needs

Best Tool Chest: Reviews

Haven’t got the time? Well, here’s a few tool chest in short we have covered.

Table could not be displayed.

1. Keter 240762 5-Drawer Modular Rolling Tool Chest

Why These Keter 240762 5-Drawer Tool Chest?

Of all the tool chests we’ve seen in the market, we were most impressed by the Keter 240762 5-Drawer Modular Rolling Tool Chest.At first glance, you would think that this tool chest is an unassuming model. But once we opened the drawers to see what it offers, we were quite impressed with what we saw.

The Keter 240762 5-Drawer Modular Rolling Tool Chest comes with five drawers of different sizes. This allows you to organize tools based on their size – making it easier to locate the nuts and bolts from the power tools.It also comes with a central locking system to securely keep all your tools. That will surely give you peace of mind, knowing all your items are safe.

Thanks to its set of wheels, moving this tool chest from one side of the garage to another won’t be a problem. It also has locking casters, so it stays put if you have to work on something.

We also love that the Keter 240762 5-Drawer Modular Rolling Tool Chest has compact dimensions. Once you’re done with your project, you can safely stow it away without taking up a lot of space in your garage.

PROS:

It is easy to assemble.
It is built with an impressive central locking system.
It comes with wheels with locking casters for improved mobility.
It has multiple drawers and internal organizers.
It offers good value for the money.

CONS:

Its plastic components are not very durable.
It may be too compact for bulkier and heavier tools.

2. Giantex Mini Tool Chest & Tool Box

Why These Giantex Mini Tool Chest & Tool Box?

Another top competitor for the best tool chest in the market is the Giantex Mini Tool Chest & Tool Box. With its stylish exterior and impressive storage features, there’s no doubt that this item deserves to be on this list.

This impressive unit comes with a tool chest and a cabinet that fits almost any tool imaginable. Whether it’s a set of nuts or power tools, you can find a storage compartment that will keep them safe. And if the whole thing is too bulky for you, you can at least bring the detachable upper toolbox in case you have to use it for emergencies.

We also love that the cabinet door comes with six hooks where you can safely hang wrenches and similar tools. This allows you to maximize the space while making sure that everything is properly organized.

You don’t have to worry about its durability, either. The Giantex Mini Tool Chest & Tool Box is made of an iron frame that’s sturdy and lightweight. Thus, you know that it’s built to last a long time. And for its price, you can call us impressed.

PROS:

It is made of premium and durable materials.
It is stylish.
It comes with multiple storage options.
It offers good value for the money.
It comes with wheels and a convenient handle for excellent mobility.

CONS:

The wheels do not lock in place.

3. Seville Classics UHD20204B UltraHD 6-Drawer Rolling Tool Cabinet

Why These Seville Classics UHD20204B Tool Cabinet?

For serious handymen and professionals, we believe you will be most impressed by the Seville Classics UHD20204B UltraHD 6-Drawer Rolling Tool Cabinet. With its superior construction and detailing, you will love having this tool chest in your workshop.

We weren’t lying when we said that this tool chest boasts superior construction. It comes with a powder-coated steel body finished with heavy-duty stainless steel doors. Not only does this ensure a smooth pulling action for the drawers, but it also promises unmatched durability and strength.

At the top of this drawer is a thick wooden surface that can double as a tabletop on days when you’re not using it. You can even use it as an extension of your work area for maximum convenience.

The Seville Classics UHD20204B UltraHD 6-Drawer Rolling Tool Cabinet comes with five small drawers and one large and deep drawer. And with its large 300-pound capacity, there seems to be no limit as to which tools you can keep in it. Without a doubt, you can safely store all your tools in this portable tool chest.

PROS:

It is made of premium and durable materials.
It is corrosion and rust-resistant.
It has a versatile design.
It has an impressive 300-pound storage capacity.
It comes with four large heavy-duty wheels, two of which can be locked to keep it from moving in place.

CONS:

It is not easy to assemble.

4. Seville Classics UHD20205B UltraHD Rolling Storage Cabinet

Why These Seville Classics UHD20205B Storage Cabinet?

If you love the superior construction of the Seville Classics UHD20204B but prefer a more versatile storage space, then the Seville Classics UHD20205B UltraHD Rolling Storage Cabinet is perfect for you.

Like the UHD20204B, this sturdy tool chest is also made of a powder-coated steel body with stainless steel drawers and doors. This assures you of how sturdy it is, so you know you’re getting your money’s worth. Similarly, it also has a wooden surface that doubles as a work area for your convenience.

The biggest difference between these two units lies in how their storage drawers are arranged. The Seville Classics UHD20205B UltraHD Rolling Storage Cabinet comes with three small drawers, one deep drawer, and one large cabinet. This gives you better storage flexibility, allowing you to keep larger power tools with no worries.

We also love that the Seville Classics UHD20205B UltraHD Rolling Storage Cabinet comes with a 300-pound weight capacity, so you know that it’s one heavy-duty tool chest. It also comes with heavy-duty wheels that smoothly roll on any surface for improved portability.

PROS:

It is made of premium and durable materials.
It is rust and corrosion-resistant.
It has a versatile design.
It has a large cabinet with two internal dividers for larger tools and accessories.
It has an impressive 300-pound capacity.

CONS:

It is not easy to assemble.

5. Goplus 6-Drawer Rolling 2-in-1 Tool Chest and Cabinet

Why These Goplus 2-in-1 Tool Chest and Cabinet?

The Goplus 6-Drawer Rolling 2-in-1 Tool Chest and Cabinet is another top contender for the best tool chest for professionals. With its ample storage spaces and flexible design, it’s easy to see why a lot of serious handymen prefer to have this in their workshop.

Thanks to its premium alloy steel construction, the Goplus 6-Drawer Rolling 2-in-1 Tool Chest and Cabinet is built to last for decades. This is completed with a rust and corrosion-resistant finish that keeps it looking great for a long time.

One of the reasons why we love the Goplus 6-Drawer Rolling 2-in-1 Tool Chest and Cabinet is its unparalleled design. It comes with three small drawers, three medium-sized drawers, one large bottom cabinet, two trays, and 4 hooks. This well-thought-of design guarantees that space will be maximized.

To ensure portability, this tool chest comes with four wheels and an elevated handle that makes it easier to push and pull. You can also slip the removable top chest inside the bottom cabinet for more secure transportation. That reflects how the Goplus 6-Drawer Rolling 2-in-1 Tool Chest and Cabinet is a product of years of research and design perfection.

PROS:

It is made of premium and durable materials.
Its drawers have liners to prevent damage to your tools.
It has a flexible design.
It helps make tools easier to arrange.
It has an ergonomic handle and four wheels for comfortable transporting.
It offers good value for the money.

CONS:

It can be hard to maneuver.
It can be prone to dents if not handled properly.

6. Husky 5-Drawer Tool Chest

Why These Husky Tool Chest?

For the hobbyist who is willing to invest in a premium tool chest, we believe the Husky 5-Drawer Tool Chest is the best for you.

This tool chest is made with welded steel material that’s powder-coated for maximum durability. Not only does this guarantee a solid and sturdy construction, but it also promises corrosion- and rust-resistant body. Thus, you know that the Husky 5-Drawer Tool Chest is built for long-term use – giving you the best value for what you pay for.

This tool chest comes with two small drawers and three medium-sized ones that safely keeps a hobbyist’s arsenal. It also has a top til that serves both as extra storage space or as a work area extension.

We also love how the Husky 5-Drawer Tool Chest comes with a stylish all-black aesthetic. Whether you’re using it for your garage or workspace, expect this tool chest to instantly make the room more interesting.

And since it is quite compact, it wouldn’t take much storage space when you’re not using any of your tools.

PROS:

It has a solid and sturdy construction.
It is made of premium and corrosion-resistant material.
It is compact and space-saving.
It comes with a secure locking mechanism.
All drawers move smoothly, even after years of use.

CONS:

It is quite pricey.
It offers limited storage space.

7. Craftsman CMST82769RB Tool Cabinet

Why These Craftsman CMST82769RB Tool Cabinet?

The Craftsman CMST82769RB Tool Cabinet is another tool chest to look out for. Coming from an established brand like Craftsman, we had so much to expect from this item. Thankfully, it exceeded all our expectations, which is why we believe it’s the best tool chest for heavy-duty tools.

This tool chest is made from premium steel that’s built to last for a long time. It boasts a heavy-duty design that can take on up to 1,500 pounds of load. And if that’s not impressive, we don’t know what is.

The Craftsman CMST82769RB Tool Cabinet comes with 5 drawers of different sizes that can conveniently house tools of different sizes and shapes. Each drawer is built with ball bearings that make opening and closing effortless. It also comes with drawer liners to keep all your tools safe and damage-free.

PROS:

It is easy to assemble.
It is spacious.
It offers easy tool organization.
It has an impressive 1,500-pound load rating.
It has a secure and convenient central locking system.

CONS:

It is prone to dents.

8. On Shine High Capacity 8-Drawer Detachable Organizer Tool Chest Combo

Why These On Shine High Capacity Detachable Organizer Tool Chest Combo?

Another highly-rated tool chest is the On Shine High Capacity 8-Drawer Detachable Organizer Tool Chest Combo.

This tool chest combo has a detachable organizer that comes with three mini drawers and 2 small drawers. On the other hand, the bottom half has three large drawers and a large compartment, so you can safely store virtually any tool you have in your arsenal

.Each drawer has ball bearings, so gliding them in and out won’t be a problem. And thanks to its non-slip liner, you can be assured that all your tools will be securely in place, even as you push the tool chest across your workshop.

The On Shine High Capacity 8-Drawer Detachable Organizer Tool Chest Combo boasts having a sturdy stainless steel construction and is finished off with anti-rust powder coating. This makes it extremely sturdy while also maintaining its eye-catching aesthetics.

PROS:

It is rust and corrosion-resistant.
It is spacious.
It is easy to assemble.
It is highly portable and easy to maneuver.
It offers good value for the money.

CONS:

It is not very durable.

9. Thor Group HTC7215W 15-Drawer Tool Chest with Work Station

Why These HTC7215W Tool Chest with Work Station?

Professional handymen who are looking for an all-in-one tool chest will be most amazed by the Thor Group HTC7215W 15-Drawer Tool Chest with Work Station.

This large 72-inch tool chest comes with a whopping 15 drawers – nine small ones, three medium-sized ones, and three large ones. These drawers allow you to organize virtually anything, whether it’s different wrenches or large power drills.

At the top of these drawers is a large wooden surface that doubles as a convenient workspace. This saves you a lot of space in your work station since you won’t need a separate table to work on.

The Thor Group HTC7215W 15-Drawer Tool Chest with Work Station is also built for the long run. It has a heavy-duty stainless-steel body that’s durable and incredibly sturdy. The drawers are also rated for 100-pound capacity, so you know that it can hold an impressive amount of tools.

PROS:

It is made of premium and durable materials.
It is spacious.
It has a versatile design.
It has a large built-in workstation.
It has heavy-duty wheels that make it easy to move around.
It offers good value for the money.

CONS:

As of writing, there are no negative reviews of this item.

10. Stalwart Stackable Toolbox Rolling Mobile Organizer

Why These Stalwart Stackable Toolbox Rolling Mobile Organizer ?

If portability is your main priority, then you might want to consider the Stalwart Stackable Toolbox Rolling Mobile Organizer.

This tool chest is specially designed for professionals who love working on the go. It features two drawers, a storage tray, and one large tilt-drawer that keeps all your tools and work accessories in place. You can also attach bungee cords to its sides, so you can securely hang items to it.

The Stalwart Stackable Toolbox Rolling Mobile Organizer comes with two large wheels and a telescopic handle. This allows you to pull it around like a trolley for superior comfort and convenience

PROS:

It is highly portable.
It is easy to maneuver.
It is stylish.
It has a decent storage capacity.

CONS:

Some plastic components are not very durable.
Tools tend to move around during transport.

Buying Guide of Best Tool Chest

Before buying a tool chest, it’s important to consider the following factors first. Doing so will guarantee that you’ll be able to find the best tool chest for your needs – and that keeps you from regretting your purchase.

Capacity

The first thing you have to consider is the capacity of the tool chest. This varies largely on whether you’re a casual do-it-yourself guy or a professional handyman.

If you’re a hobbyist, you may not have a lot of tools in your collection, and this merits a compact or medium-sized tool chest. But if you need your tools to make a living, you should invest in a large tool chest with multiple drawers and interior organizers.

Durability

Another factor you have to consider is the durability of the tool chest. As much as possible, pick one that is made of sturdy and premium materials like stainless steel or similar metals.

While plastic is an affordable option, plastic is not as durable as metal. You might end up replacing it more often – and that will cost you more money than investing in a sturdy metal tool chest.

Organization Features

Aside from its capacity and durability, you should also consider how well it can organize all your tools. You should consider the number of drawers, the size of the drawers, whether it has cabinets, and other features that will help keep all your tools in place.

If your tools are properly organized, locating each one will be easy. This helps you finish the job faster, saving you your precious time. Also, this will keep all your tools neatly in place, thereby preventing them from getting damaged.

Security

If you fix or build things for a living, you know that investing in expensive tools will help you produce high-quality output. With that said, you have to make sure that all your tools are securely housed in a safe tool chest.

As much as possible, you should consider tool chests with sophisticated locking systems. This will give you peace of mind, knowing that only you have access to all your work gear.

Also, this is a great way to make sure that your kids won’t accidentally find them and play with them.

Portability or Mobility

And finally, you should consider the portability or mobility of the tool chest.

In the case of smaller models, portability won’t be a problem. They usually come with ergonomic handles, so moving them around your workstation won’t be a problem.

But if you have to work with large tool chests, you should consider buying one with wheels attached at the bottom. This will make it more mobile, especially if you have to work on different parts of the work area. Also, make sure that it comes with comfortable handles that will make maneuvering easier.

But before you just pick the best tool chest with wheels, also consider if the wheels can handle the weight of the chest. Otherwise, it will easily fall apart – and that is such an expensive way to waste money.

FAQs

What is the best tool chest in the market?

Out of all the options we’ve presented, it’s hard to pick the best tool chest in the market. But if we have to name one, it would be between the Keter 240762 5-Drawer Modular Rolling Tool Chest and the Thor Group HTC7215W 15-Drawer Tool Chest with Work Station.

The Keter 240762 Tool Chest would be the best compact tool chest for hobbyists, while the Thor Group HTC7215W will be perfect for more serious workers.

Why do I need a tool chest?

Tool chests allow you to keep all your tools and similar accessories in one convenient organizer. This makes locating a particular tool easier, so you can finish the job faster. Additionally, these tool chests protect your tools from external factors that could easily cause them to corrode or develop rust. Thus, tool chests also help prolong the life of your tools.

How do I choose a tool chest?

There are several factors that you might want to consider before choosing a tool chest. To make sure you find the best, we recommend looking into its size and the number of drawers and organizers it offers. You must also consider the durability of the tool chest, so you don’t have to keep replacing it from time to time.

But most importantly, make sure that the tool chest will properly serve as a storage box for all your tools. Make sure that it caters to all your storage needs.

Conclusion

While having all these options may seem overwhelming, finding the best tool chest is not at all impossible. The secret lies in knowing what you need first, then list down the features you need based on those needs.

Fortunately for you, we’ve already gathered 10 of the best in the market – in terms of durability, convenience, and tool organization. No doubt, we guarantee that you’ll find your perfect match on this list.

But if you ever need further guidance, you can always consult our buying guide. That will help you determine the perfect tool chest for your tool-storage needs.

Tools Reviews

Why Do We Trust Dewalt?

Impact Drivers vs. Drills

What can I do with a Dewalt impact driver?

5 Best Dewalt Impact Drivers

1. DEWALT 20V Max Impact Driver Kit- Best For Speed

2. DEWALT 20V MAX XR Impact Driver- Best For Long Battery Life

3. DEWALT 20V MAX XR Impact Driver Kit- Best For Lightweight

4. DEWALT XTREME 12V MAX Impact Driver Kit- Best for Shorter design

5. DEWALT ATOMIC 20V MAX Impact Driver

How Do We Determine Which DeWalt Impact Driver is The Best?

Final Words on the Reviews of Dewalt impact drivers

Table of Contents

Types of Paint Sprayers for Cabinets

HVLP:

Airless:

LVLP:

Conventional:

Main Features of Paint Sprayers

How to Choose The Best Paint Sprayers for Cabinet

Ease of use

Capacity

Reviews of 7 Best Paint Sprayers for Cabinets

1. HomeRight Finish Max C800766 Paint Sprayer

2. Wagner FLEXiO 590 HVLP Paint Sprayer

3. REXBETI Ultimate 750 Paint Sprayer

4. Wagner Double Duty HVLP Paint Sprayer

5. Graco Ultra Max Airless Handheld Paint Sprayer

6. HomeRight Super Finish Max Painter

7. Graco Ultra Airless Handheld Paint Sprayer

Maintenance of the Paint Sprayers

Keeping the filter clean

Protect the motor from paint

Look after the valves

Pour the paint

Use proper fluids for protection

Buying Guide for the best paint sprayer for cabinets

Using a Paint Sprayer like a Professional

Protective Gear to Wear when Paint Spraying

Conclusion on the Review of best paint sprayer for cabinets

Best Tool Chest: Reviews

Haven’t got the time? Well, here’s a few tool chest in short we have covered.

1. Keter 240762 5-Drawer Modular Rolling Tool Chest

Why These Keter 240762 5-Drawer Tool Chest?

2. Giantex Mini Tool Chest & Tool Box

Why These Giantex Mini Tool Chest & Tool Box?

3. Seville Classics UHD20204B UltraHD 6-Drawer Rolling Tool Cabinet

Why These Seville Classics UHD20204B Tool Cabinet?

4. Seville Classics UHD20205B UltraHD Rolling Storage Cabinet

Why These Seville Classics UHD20205B Storage Cabinet?

5. Goplus 6-Drawer Rolling 2-in-1 Tool Chest and Cabinet

Why These Goplus 2-in-1 Tool Chest and Cabinet?

6. Husky 5-Drawer Tool Chest

Why These Husky Tool Chest?

7. Craftsman CMST82769RB Tool Cabinet

Why These Craftsman CMST82769RB Tool Cabinet?

8. On Shine High Capacity 8-Drawer Detachable Organizer Tool Chest Combo

Why These On Shine High Capacity Detachable Organizer Tool Chest Combo?

9. Thor Group HTC7215W 15-Drawer Tool Chest with Work Station

Why These HTC7215W Tool Chest with Work Station?

10. Stalwart Stackable Toolbox Rolling Mobile Organizer

Why These Stalwart Stackable Toolbox Rolling Mobile Organizer ?

Buying Guide of Best Tool Chest

Capacity

Durability

Organization Features

Security

Portability or Mobility

FAQs

Conclusion

Check Our Other Reviews on Best Cordless Drill

Footer

We Talk About Tools

AMAZON ASSOCIATES PROGRAM

We Talk About Tools